― Monica Petway, Saturday, 20 March 2004 00:44 (twenty-two years ago)
― hstencil, Saturday, 20 March 2004 00:51 (twenty-two years ago)
― anthony kyle monday (akmonday), Saturday, 20 March 2004 00:52 (twenty-two years ago)
― dean! (deangulberry), Saturday, 20 March 2004 01:20 (twenty-two years ago)
― s1ocki (slutsky), Saturday, 20 March 2004 01:22 (twenty-two years ago)
ok: i need to connect a DJ mixer and a stereo receiver that are about 100 ft apart. i've run a length of speaker wire between them and i've got RCA connectors on the ends. i hooked them all up and.. nothing.
is this because the mixer and receiver signals are at line level and not speaker level? do i need another kind of cable? also i think i didn't correctly attach the RCA connectors. i really have no idea what i'm doing.
help please?
― one time, Sunday, 18 November 2007 21:00 (eighteen years ago)
speaker wire? you sure that's what it is? you need to use an rca cable. make sure the cable is of high quality and out of the way of foot traffic as long cables tend to break easily. the mixer should be outputting line level. make sure NOT to hook up the mixer to the phono jack. Phono jacks have extra amplification.
― sexyDancer, Sunday, 18 November 2007 21:07 (eighteen years ago)
i used 16-gauge, 2-conductor, stranded speaker wire. i couldn't find any rca cable long enough. should i have used something else?
― one time, Sunday, 18 November 2007 21:12 (eighteen years ago)